Photovoltaic Canopy Steel Solution

Photovoltaic Canopy Steel Solution

A PV carport is sized by clearance, tilt and foundations, not by treating a rain canopy as the array frame.

The canopy must clear cars and hold tilt and access. The grid is not a rain-canopy span. Foundations and cable trays belong in the scheme. Electrical work is not assumed in the steel price.

Send plan or stall count, clearance, module and tilt, and wind or snow. Unpublished yield and support tonnage are omitted.

Photovoltaic Canopy Steel Solution

Outdoor coating follows exposure; the schedule names the system.

Attach the site plan and module data.

Tiankai Southeast fabricates marked members from approved drawings and supports erection by mark number. Sizes, loads and delivery follow the confirmed design file and contract; this page does not turn uncalculated tonnage, thickness or time into a promise.

Tiankai Southeast fabricates marked members from approved drawings and supports erection by mark number. Sizes, loads and delivery follow the confirmed design file and contract; this page does not turn uncalculated tonnage, thickness or time into a promise.

  • Fix clearance, tilt and stalls
  • Raise trays and foundations
  • Do not assume electrical work

FAQ

  • Who is responsible for foundations and embedments?

    The steel frame is usually fabricated in the plant and erected on site. Foundations, concrete and embedments are typically done by a local civil contractor. We can issue base-plate sizes, anchor layouts and embedment notes. The contract scope defines the interface.

  • How are wind and snow loads decided?

    Wind and snow loads follow the project location, the local code and the owner design brief. There is no single default number. Please provide site, basic wind pressure, snow load, seismic data and roof live load. A first estimate can use the stated building use; fabrication follows approved drawings only.

  • Can the building be expanded later?

    Expansion is easier if bay spacing, gable conditions, crane or mezzanine loads are reserved in the first scheme. Please say whether a future extension, crane or mezzanine is planned. A building without reserves can still be modified, but foundations and existing members must be rechecked.

  • Which steel grades and codes do you follow?

    Common carbon grades can be specified (for example Q235, Q355 or an agreed equivalent). Welding, holes, geometry and coating follow the contract drawings and the destination code. For export, state the required standard in the inquiry (GB, EN, ASTM, etc.) so material and inspection can match.